Individual Submission M. Jones Internet-Draft Bridgewater Systems Updates: 3588 (if approved) J. Korhonen Intended status: Standards Track Nokia Siemens Networks Expires: June 12, 2010 December 9, 2009 Diameter Extended NAPTR draft-jones-dime-extended-naptr-01 Abstract This document describes an extended format for the NAPTR service fields used in dynamic Diameter agent discovery. The extended format allows NAPTR queries to contain Diameter Application-Id information. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. Status of this Memo This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on June 12, 2010. Copyright Notice Copyright (c) 2009 IETF Trust and the persons identified as the Jones & Korhonen Expires June 12, 2010 [Page 1] Internet-Draft dime-extended-naptr December 2009 document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the BSD License. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. Jones & Korhonen Expires June 12, 2010 [Page 2] Internet-Draft dime-extended-naptr December 2009 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. Extended NAPTR Service Field . . . . . . . . . . . . . . . . . 4 4. Extended NAPTR-based Diameter Peer Discovery . . . . . . . . . 5 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 7 6. Security Considerations . . . . . . . . . . . . . . . . . . . . 7 7. Normative References . . . . . . . . . . . . . . . . . . . . . 7 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 8 Jones & Korhonen Expires June 12, 2010 [Page 3] Internet-Draft dime-extended-naptr December 2009 1. Introduction The Diameter base protocol [RFC3588] specifies three mechanisms for the Diameter peer discovery. One of these involves the Diameter implementation performing a NAPTR query [RFC3403] for a server in a particular realm. These NAPTR records provide a mapping from a domain, to the SRV record [RFC2782] for contacting a server with the specific transport protocol in the NAPTR services field. Section 11.6 of RFC 3588 defines the following NAPTR service fields: Services Field Protocol AAA+D2T TCP AAA+D2S SCTP However, foreseen network topologies require border AAA nodes that will be specialized by Diameter application and the NAPTR service field does not allow a Diameter implementation to determine the application supported by the AAA node. Without this information, a Diameter implementation must connect and perform a capability negotiation with each candidate AAA node. This document addresses this problem by specifying an extended NAPTR service field format that permits discovery of Diameter peers that support a specific Diameter application. 2. Terminology The Diameter base protocol specification (Section 1.4 of RFC 3588) defines most of the terminology used in this document. 3. Extended NAPTR Service Field The Extended NAPTR service field ABNF specification for the discovery of Diameter agents supporting a specific Diameter application is show below. Jones & Korhonen Expires June 12, 2010 [Page 4] Internet-Draft dime-extended-naptr December 2009 naptr-svc-field = "AAA+D2" < protocol> [ *appln-list ] protocol = "T" / "S" ; "T" for TCP and "S" for SCTP. appln-list = "+AP:" appln-id [ *( "," appln-id ) ] ; Comma separated list of application ; identifiers prefixed by "+AP:". appln-id = *DIGIT ; Application identifier expressed as a ; decimal integer. For example, a NAPTR service field value of: 'AAA+D2S+AP:6' Means that the Diameter node in the SRV record supports the Diameter Session Initiation Protocol (SIP) Application ('6') and SCTP as the transport protocol. 'AAA+D2S+AP:6,1,5,4294967295' Means that the Diameter node in the SRV record supports the Diameter Session Initiation Protocol (SIP) Application ('6'), NASREQ Application ('1'), EAP Application ('5') and SCTP as the transport protocol. The Diameter node also provides Relay functionality ('4294967295'). The maximum length of the NAPTR service field is 256 octets including one octet length field (see Section 4.1 of RFC 3403 and Section 3.3 of [RFC1035]). The DNS administrator of some domain SHOULD also provision base RFC 3588 style NAPTR records in order to guarantee backwards compatibility with legacy RFC 3588 compliant Diameter peers. If the DNS administrator provisions both extended NAPTR records as defined in this specification and legacy RFC 3588 NAPTR records, then the extended NAPTR records MUST have higher priority (e.g. lower order and/or preference values) than legacy NAPTR records. 4. Extended NAPTR-based Diameter Peer Discovery The basic Diameter Peer Discover principles are described in Section 5.2 of [RFC3588]. This specification extends the NAPTR query procedure in the Diameter peer discovery mechanism by allowing the querying node to determine which applications are supported by resolved Diameter peers. Jones & Korhonen Expires June 12, 2010 [Page 5] Internet-Draft dime-extended-naptr December 2009 The extended format NAPTR records provide a mapping from a domain, to the SRV record for contacting a server supporting a specific transport protocol and Diameter application. The resource record will contain an empty regular expression and a replacement value, which is the SRV record for that particular transport protocol. If the server supports multiple transport protocols, there will be multiple NAPTR records, each with a different Services Field value and potentially different list of supported Diameter applications. The assumption for this mechanism to work is that the DNS administrator of the queried domain has first provisioned the DNS with extended format NAPTR entries. The steps below replace the NAPTR query procedure steps in Section 5.2 of [RFC3588]. a. The Diameter implementation performs a NAPTR query for a server in a particular realm. The Diameter implementation has to know in advance which realm to look for a Diameter agent in and which Application Identifier it is interested in. The realm could be deduced, for example, from the 'realm' in a NAI that a Diameter implementation needed to perform a Diameter operation on. b. If the returned NAPTR service fields contain entries formatted as "AAA+D2X+AP:Y" where "X" indicates the transport protocol and "Y" is a comma-separated list of Application Identifiers, the target realm supports the extended format for NAPTR-based Diameter peer discovery defined in this document. If "X" matches a transport protocol supported by the client and "Y" contains the required Application Identifier, the client resolves the "replacement" field entry to a target host using the lookup method appropriate for the "flags" field. If "X" does not match a transport protocol supported by the client or "Y" does not contain the required Application Identifier, the peer discovery is abandoned. c. If the returned NAPTR service fields contain entries formatted as "AAA+D2X" where "X" indicates the transport protocol, the target realm supports the NAPTR-based Diameter peer discovery defined in [RFC3588]. If "X" matches a transport protocol supported by the client, the client resolves the "replacement" field entry to a target host using the lookup method appropriate for the "flags" field. Jones & Korhonen Expires June 12, 2010 [Page 6] Internet-Draft dime-extended-naptr December 2009 If "X" does not match a transport protocol supported by the client, the peer discovery is abandoned. d. If the target realm does not support NAPTR-based Diameter peer discovery, the client proceeds with the next peer discovery mechanism described in Section 5.2 of [RFC3588]. 5. IANA Considerations Section 11.6 of [RFC3588] defines a IANA registry for the NAPTR Services Field entries. Although this document does not define a new transport protocol, it is proposed to add the following entries to the existing registry to reflect the extended format of the NAPTR Services Field: Services Field Protocol AAA+D2T+AP:x TCP AAA+D2S+AP:x SCTP Editor's Note: IANA is currently missing the registry for the NAPTR Service Fields defined in [RFC3588]. This oversight will need to be resolved for this document to proceed. 6. Security Considerations This document specifies an enhancement to the NAPTR service field format defined in the Diameter base protocol and the same security considerations described in RFC 3588 are applicable to this document. No further extensions are required beyond the security mechanisms offered by RFC 3588. However, a malicious host doing NAPTR queries learns applications supported by Diameter agents in a certain realm faster, which might help the malicious host to scan potential targets for an attack more efficiently when some applications have known vulnerabilities. 7. Normative References [RFC1035] Mockapetris, P., "Domain names - implementation and specification", STD 13, RFC 1035, November 1987. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2782] Gulbrandsen, A., Vixie, P., and L. Esibov, "A DNS RR for specifying the location of services (DNS SRV)", RFC 2782, Jones & Korhonen Expires June 12, 2010 [Page 7] Internet-Draft dime-extended-naptr December 2009 February 2000. [RFC3403] Mealling, M., "Dynamic Delegation Discovery System (DDDS) Part Three: The Domain Name System (DNS) Database", RFC 3403, October 2002. [RFC3588] Calhoun, P., Loughney, J., Guttman, E., Zorn, G., and J. Arkko, "Diameter Base Protocol", RFC 3588, September 2003. Authors' Addresses Mark Jones Bridgewater Systems Email: mark.jones@bridgewatersystems.com Jouni Korhonen Nokia Siemens Networks Email: jouni.nospam@gmail.com Jones & Korhonen Expires June 12, 2010 [Page 8]