| Internet-Draft | Syslog Management | September 2024 |
| Clarke, et al. | Expires 22 March 2025 | [Page] |
This document defines a YANG data model for the configuration of a syslog process. It is intended that this model be used by vendors who implement syslog collectors in their systems.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 22 March 2025.¶
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
This document defines a YANG [RFC7950] configuration data model that may be used to configure the syslog feature running on a system. YANG models can be used with network management protocols such as NETCONF [RFC6241] to install, manipulate, and delete the configuration of network devices.¶
The data model makes use of the YANG "feature" construct which allows implementations to support only those syslog features that lie within their capabilities.¶
This module can be used to configure the syslog application conceptual layers as implemented on the syslog collector.¶
Essentially, a syslog process receives messages (from the kernel, processes, applications or other syslog processes) and processes them. The processing may involve logging to a local file, and/or displaying on console, and/or relaying to syslog processes on other machines. The processing is determined by the "facility" that originated the message and the "severity" assigned to the message by the facility.¶
Such definitions of syslog protocol are defined in [RFC5424] , and are used in this RFC.¶
The YANG model in this document conforms to the Network Management Datastore Architecture defined in [RFC8342].¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
The following terms are used throughout this document:¶
The YANG model in this document conforms to the Network Management Datastore Architecture defined in [RFC8342] .¶
This document contains many placeholder values that need to be replaced with finalized values at the time of publication. This note summarizes all of the substitutions that are needed. No other RFC Editor instructions are specified elsewhere in this document.¶
Artwork in this document contains shorthand references to drafts in progress. Please apply the following replacements:¶
The syslog model was designed by comparing various syslog features implemented by various vendors' in different implementations.¶
The module defines leafs that are common across implementations. Its simple design is meant to offer maximum flexibility. However, not all optional features defined in this document are present in all vendor implementations. Vendors therefore, need to use the feature statements to specify the optional features they support. At the same time, vendors can augment the model to add proprietary features. Extending Facilities (Appendix B.1) shows an examples of how that can be realized.¶
Syslog consists of originators and collectors. The following diagram shows syslog messages flowing from originators, to collectors where filtering can take place.¶
Originators
+-------------+ +-------------+ +-------------+ +-------------+
| Various | | OS | | | | Remote |
| Components | | Kernel | | Line Cards | | Servers |
+-------------+ +-------------+ +-------------+ +-------------+
+-------------+ +-------------+ +-------------+ +-------------+
| SNMP | | Interface | | Standby | | Syslog |
| Events | | Events | | Supervisor | | Itself |
+-------------+ +-------------+ +-------------+ +-------------+
| |
+----------------------------------------------------------------+
|
|
|
|
+-------------+--------------+
| | |
v v v
Collectors
+----------+ +----------+ +----------------+
| | | Log | |Remote Relay(s)/|
| Console | | File(s) | |Collector(s) |
+----------+ +----------+ +----------------+
¶
Figure 1. Syslog Processing Flow¶
Collectors are configured using the leaves in the syslog model "actions" container which correspond to each message collector:¶
Within each action, a selector is used to filter syslog messages. A selector consists of a list of one or more filters specified by facility-severity pairs, and, if supported via the select-match feature, an optional regular expression pattern match that is performed on the [RFC5424] field.¶
A syslog message is processed if:¶
There is an element of facility-list (F, S) where
the message facility matches F
and the message severity matches S
and/or the message text matches the regex pattern (if it
is present)
¶
The facility is one of a specific syslog-facility, or all facilities.¶
The model offers the ability to select a transport that a user might want to use for a remote relay or collector. The choice is between using UDP, or TLS based sessions. The user can configure multiple relays or collectors, but they have to use the same transport.¶
The severity is one of type syslog-severity, all severities, or none. None is a special case that can be used to disable a filter. When filtering severity, the default comparison is that messages of the specified severity and higher are selected to be logged. This is shown in the model as "default equals-or-higher". This behavior can be altered if the select-adv-compare feature is enabled to specify a compare operation and an action. Compare operations are: "equals" to select messages with this single severity, or "equals-or-higher" to select messages of the specified severity and higher. Actions are used to log the message, block the message, or stop the message from being logged.¶
Many vendors extend the list of facilities available for logging in their implementation. An example is included in Extending Facilities (Appendix B.1).¶
A simplified tree representation of the data model is used in this document. Please see [RFC8340] for tree diagram notation.¶
module: ietf-syslog
+--rw syslog!
+--rw actions
+--rw console! {console-action}?
| +--rw filter
| | +--rw facility-list* [facility severity]
| | +--rw facility union
| | +--rw severity union
| | +--rw advanced-compare {select-adv-compare}?
| | +--rw compare? enumeration
| | +--rw action? identityref
| +--rw pattern-match? string {select-match}?
+--rw file {file-action}?
| +--rw log-file* [name]
| +--rw name inet:uri
| +--rw filter
| | +--rw facility-list* [facility severity]
| | +--rw facility union
| | +--rw severity union
| | +--rw advanced-compare {select-adv-compare}?
| | +--rw compare? enumeration
| | +--rw action? identityref
| +--rw pattern-match? string {select-match}?
| +--rw structured-data? boolean {structured-data}?
| +--rw file-rotation
| +--rw number-of-files? uint32 {file-limit-size}?
| +--rw max-file-size? uint32 {file-limit-size}?
| +--rw rollover? uint32
| | {file-limit-duration}?
| +--rw retention? uint32
| {file-limit-duration}?
+--rw remote {remote-action}?
+--rw destination* [name]
+--rw name string
+--rw (transport)
| +--:(udp)
| | +--rw udp
| | +--rw udp* [address]
| | +--rw address inet:host
| | +--rw port? inet:port-number
| +--:(tls)
| +--rw tls
| +--rw tls* [address]
| +--rw address inet:host
| +--rw port?
| | inet:port-number
| +--rw client-identity!
| | +--rw (auth-type)
| | ...
| +--rw server-authentication
| | +--rw ca-certs! {server-auth-x509-cert}?
| | | ...
| | +--rw ee-certs! {server-auth-x509-cert}?
| | | ...
| | +--rw raw-public-keys!
| | | {server-auth-raw-public-key}?
| | | ...
| | +--rw tls12-psks? empty
| | | {server-auth-tls12-psk}?
| | +--rw tls13-epsks? empty
| | {server-auth-tls13-epsk}?
| +--rw hello-params {tlscmn:hello-params}?
| | +--rw tls-versions
| | | ...
| | +--rw cipher-suites
| | ...
| +--rw keepalives {tls-client-keepalives}?
| +--rw peer-allowed-to-send? empty
| +--rw test-peer-aliveness!
| ...
+--rw filter
| +--rw facility-list* [facility severity]
| +--rw facility union
| +--rw severity union
| +--rw advanced-compare {select-adv-compare}?
| +--rw compare? enumeration
| +--rw action? identityref
+--rw pattern-match? string {select-match}?
+--rw structured-data? boolean {structured-data}?
+--rw facility-override? identityref
+--rw source-interface? if:interface-ref
| {remote-source-interface}?
+--rw signing! {signed-messages}?
+--rw cert-signers
+--rw cert-signer* [name]
| +--rw name string
| +--rw cert
| | +--rw public-key-format?
| | | identityref
| | +--rw public-key? binary
| | +--rw private-key-format?
| | | identityref
| | +--rw (private-key-type)
| | | +--:(cleartext-private-key)
| | | | {cleartext-private-keys}?
| | | | ...
| | | +--:(hidden-private-key)
| | | | {hidden-private-keys}?
| | | | ...
| | | +--:(encrypted-private-key)
| | | {encrypted-private-keys}?
| | | ...
| | +--rw cert-data?
| | | end-entity-cert-cms
| | +---n certificate-expiration
| | | {certificate-expiration-notification}
?
| | | +-- expiration-date
| | | yang:date-and-time
| | +---x generate-csr {csr-generation}?
| | +---w input
| | | ...
| | +--ro output
| | ...
| +--rw hash-algorithm? enumeration
+--rw cert-initial-repeat? uint32
+--rw cert-resend-delay? uint32
+--rw cert-resend-count? uint32
+--rw sig-max-delay? uint32
+--rw sig-number-resends? uint32
+--rw sig-resend-delay? uint32
+--rw sig-resend-count? uint32
This module imports typedefs from [RFC6991], [RFC8343], groupings from [I-D.ietf-netconf-crypto-types], and [I-D.ietf-netconf-tls-client-server], and it references [RFC5424], [RFC5425], [RFC5426], [RFC5848], [RFC8089], [RFC8174], and [Std-1003.1-2008].¶
<CODE BEGINS> file "ietf-syslog@2024-09-18.yang"
module ietf-syslog {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-syslog";
prefix syslog;
import ietf-inet-types {
prefix inet;
reference
"RFC 6991: Common YANG Data Types";
}
import ietf-interfaces {
prefix if;
reference
"RFC 8343: A YANG Data Model for Interface Management";
}
import ietf-tls-client {
prefix tlsc;
reference
"I-D.ietf-netconf-tls-client-server:
YANG Groupings for TLS Clients and TLS Servers";
}
import ietf-crypto-types {
prefix ct;
reference
"I-D.ietf-netconf-crypto-types: YANG Data Types for
Cryptography";
}
organization
"IETF NETMOD (Network Modeling) Working Group";
contact
"WG Web: <https://datatracker.ietf.org/wg/netmod/>
WG List: <mailto:netmod@ietf.org>
Editor: Mahesh Jethanandani
<mailto:mjethanandani@gmail.com>
Editor: Joe Clarke
<mailto:jclarke@cisco.com>
Editor: Kiran Agrahara Sreenivasa
<mailto:kirankoushik.agraharasreenivasa@verizonwireless.com>
Editor: Clyde Wildes
<mailto:clyde@clydewildes.com>";
description
"This module contains a collection of YANG definitions
for syslog configuration.
Copyright (c) 2024 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Revised BSD License
set forth in Section 4.c of the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC zzzz
(https://www.rfc-editor.org/info/rfczzzz);
see the RFC itself for full legal notices.
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL
NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
are to be interpreted as described in BCP 14 (RFC 2119)
(RFC 8174) when, and only when, they appear in all capitals,
as shown here.";
revision 2024-09-18 {
description
"Initial Revision";
reference
"RFC zzzz: Syslog YANG Model";
}
feature console-action {
description
"This feature indicates that the local console action is
supported.";
}
feature file-action {
description
"This feature indicates that the local file action is
supported.";
}
feature file-limit-size {
description
"This feature indicates that file logging resources
are managed using size and number limits.";
}
feature file-limit-duration {
description
"This feature indicates that file logging resources
are managed using time based limits.";
}
feature remote-action {
description
"This feature indicates that the remote server action is
supported.";
}
feature remote-source-interface {
description
"This feature indicates that source-interface is supported
supported for the remote-action.";
}
feature select-adv-compare {
description
"This feature represents the ability to select messages
using the additional comparison operators when comparing
the syslog message severity.";
}
feature select-match {
description
"This feature represents the ability to select messages
based on a Posix 1003.2 regular expression pattern
match.";
}
feature structured-data {
description
"This feature represents the ability to log messages
in structured-data format.";
reference
"RFC 5424: The Syslog Protocol";
}
feature signed-messages {
description
"This feature represents the ability to configure signed
syslog messages.";
reference
"RFC 5848: Signed Syslog Messages";
}
typedef syslog-severity {
type enumeration {
enum emergency {
value 0;
description
"The severity level 'Emergency' indicating that the
system is unusable.";
}
enum alert {
value 1;
description
"The severity level 'Alert' indicating that an
action must be taken immediately.";
}
enum critical {
value 2;
description
"The severity level 'Critical' indicating a
critical condition.";
}
enum error {
value 3;
description
"The severity level 'Error' indicating an error
condition.";
}
enum warning {
value 4;
description
"The severity level 'Warning' indicating a warning
condition.";
}
enum notice {
value 5;
description
"The severity level 'Notice' indicating a normal
but significant condition.";
}
enum info {
value 6;
description
"The severity level 'Info' indicating an
informational message.";
}
enum debug {
value 7;
description
"The severity level 'Debug' indicating a
debug-level message.";
}
}
description
"The definitions for Syslog message severity.
Note that a lower value is a higher severity. Comparisons
of equal-or-higher severity mean equal or lower numeric
value";
reference
"RFC 5424: The Syslog Protocol";
}
identity syslog-facility {
description
"This identity is used as a base for all syslog
facilities.";
reference
"RFC 5424: The Syslog Protocol";
}
identity kern {
base syslog-facility;
description
"The facility for kernel messages (0).";
reference
"RFC 5424: The Syslog Protocol";
}
identity user {
base syslog-facility;
description
"The facility for user-level messages (1).";
reference
"RFC 5424: The Syslog Protocol";
}
identity mail {
base syslog-facility;
description
"The facility for the mail system (2).";
reference
"RFC 5424: The Syslog Protocol";
}
identity daemon {
base syslog-facility;
description
"The facility for the system daemons (3).";
reference
"RFC 5424: The Syslog Protocol";
}
identity auth {
base syslog-facility;
description
"The facility for security/authorization messages (4).";
reference
"RFC 5424: The Syslog Protocol";
}
identity syslog {
base syslog-facility;
description
"The facility for messages generated internally by syslogd
facility (5).";
reference
"RFC 5424: The Syslog Protocol";
}
identity lpr {
base syslog-facility;
description
"The facility for the line printer subsystem (6).";
reference
"RFC 5424: The Syslog Protocol";
}
identity news {
base syslog-facility;
description
"The facility for the network news subsystem (7).";
reference
"RFC 5424: The Syslog Protocol";
}
identity uucp {
base syslog-facility;
description
"The facility for the UUCP subsystem (8).";
reference
"RFC 5424: The Syslog Protocol";
}
identity cron {
base syslog-facility;
description
"The facility for the clock daemon (9).";
reference
"RFC 5424: The Syslog Protocol";
}
identity authpriv {
base syslog-facility;
description
"The facility for privileged security/authorization
messages (10).";
reference
"RFC 5424: The Syslog Protocol";
}
identity ftp {
base syslog-facility;
description
"The facility for the FTP daemon (11).";
reference
"RFC 5424: The Syslog Protocol";
}
identity ntp {
base syslog-facility;
description
"The facility for the NTP subsystem (12).";
reference
"RFC 5424: The Syslog Protocol";
}
identity audit {
base syslog-facility;
description
"The facility for log audit messages (13).";
reference
"RFC 5424: The Syslog Protocol";
}
identity console {
base syslog-facility;
description
"The facility for log alert messages (14).";
reference
"RFC 5424: The Syslog Protocol";
}
identity cron2 {
base syslog-facility;
description
"The facility for the second clock daemon (15).";
reference
"RFC 5424: The Syslog Protocol";
}
identity local0 {
base syslog-facility;
description
"The facility for local use 0 messages (16).";
reference
"RFC 5424: The Syslog Protocol";
}
identity local1 {
base syslog-facility;
description
"The facility for local use 1 messages (17).";
reference
"RFC 5424: The Syslog Protocol";
}
identity local2 {
base syslog-facility;
description
"The facility for local use 2 messages (18).";
reference
"RFC 5424: The Syslog Protocol";
}
identity local3 {
base syslog-facility;
description
"The facility for local use 3 messages (19).";
reference
"RFC 5424: The Syslog Protocol";
}
identity local4 {
base syslog-facility;
description
"The facility for local use 4 messages (20).";
reference
"RFC 5424: The Syslog Protocol";
}
identity local5 {
base syslog-facility;
description
"The facility for local use 5 messages (21).";
reference
"RFC 5424: The Syslog Protocol";
}
identity local6 {
base syslog-facility;
description
"The facility for local use 6 messages (22).";
reference
"RFC 5424: The Syslog Protocol";
}
identity local7 {
base syslog-facility;
description
"The facility for local use 7 messages (23).";
reference
"RFC 5424: The Syslog Protocol";
}
identity action {
description
"Base identity for action for how a message will be
handled.";
}
identity log {
base action;
description
"This identity specifies that if the compare operation is
true the message will be logged.";
}
identity block {
base action;
description
"This identity specifies that if the compare operation is
true the message will not be logged.";
}
identity stop {
base action;
description
"This identity specifies that if the compare operation is
true the message will not be logged and no further
processing will occur for it.";
}
grouping severity-filter {
description
"This grouping defines the processing used to select
log messages by comparing syslog message severity using
the following processing rules:
- if 'none', do not match.
- if 'all', match.
- else compare message severity with the specified
severity according to the default compare rule (all
messages of the specified severity and greater match)
or if the select-adv-compare feature is present, use
the advance-compare rule.";
leaf severity {
type union {
type syslog-severity;
type enumeration {
enum none {
value 2147483647;
description
"This enum describes the case where no
severities are selected.";
}
enum all {
value -2147483648;
description
"This enum describes the case where all
severities are selected.";
}
}
}
mandatory true;
description
"This leaf specifies the syslog message severity.";
}
container advanced-compare {
when "../severity != \"all\" and
../severity != \"none\"" {
description
"The advanced compare container is not applicable
for severity 'all' or severity 'none'";
}
if-feature "select-adv-compare";
leaf compare {
type enumeration {
enum equals {
description
"This enum specifies that the severity
comparison operation will be equals.";
}
enum equals-or-higher {
description
"This enum specifies that the severity
comparison operation will be equals or
higher.";
}
}
default "equals-or-higher";
description
"The compare can be used to specify the comparison
operator that should be used to compare the syslog
message severity with the specified severity.";
}
leaf action {
type identityref {
base "action";
}
default "log";
description
"The action can be used to specify how the message
should be handled. This may include logging the
message, not logging the message (i.e., blocking
it), or stopping further processing.";
}
description
"This container describes additional severity compare
operations that can be used in place of the default
severity comparison. The compare leaf specifies the
type of the compare that is done and the action leaf
specifies the intended result.
Example: compare->equals and action->block means
messages that have a severity that are equal to the
specified severity will not be logged.";
}
}
grouping selector {
description
"This grouping defines a syslog selector which is used to
select log messages for the log-actions (console, file,
remote, etc.). Choose one or both of the following:
facility [<facility> <severity>...]
pattern-match regular-expression-match-string
If both facility and pattern-match are specified, both
must match in order for a log message to be selected.";
container filter {
description
"This container describes the syslog filter
parameters.";
list facility-list {
key "facility severity";
ordered-by user;
description
"This list describes a collection of syslog
facilities and severities.";
leaf facility {
type union {
type identityref {
base syslog-facility;
}
type enumeration {
enum all {
description
"This enum describes the case where
all facilities are requested.";
}
}
}
description
"The leaf uniquely identifies a syslog
facility.";
}
uses severity-filter;
}
}
leaf pattern-match {
if-feature "select-match";
type string;
description
"This leaf describes a Posix 1003.2 regular expression
string that can be used to select a syslog message for
logging. The match is performed on the SYSLOG-MSG
field.";
reference
"RFC 5424: The Syslog Protocol
Std-1003.1-2008 Regular Expressions";
}
}
grouping structured-data {
description
"This grouping defines the syslog structured data option
which is used to select the format used to write log
messages.";
leaf structured-data {
if-feature "structured-data";
type boolean;
default "false";
description
"This leaf describes how log messages are written.
If true, messages will be written with one or more
STRUCTURED-DATA elements; if false, messages will be
written with STRUCTURED-DATA = NILVALUE.";
reference
"RFC 5424: The Syslog Protocol";
}
}
container syslog {
presence
"Enables logging.";
description
"This container describes the configuration parameters for
syslog.";
container actions {
description
"This container describes the log-action parameters
for syslog.";
container console {
if-feature "console-action";
presence
"Enables logging to the console";
description
"This container describes the configuration
parameters for console logging.";
uses selector;
}
container file {
if-feature "file-action";
description
"This container describes the configuration
parameters for file logging. If file-archive
limits are not supplied, it is assumed that
the local implementation defined limits will
be used.";
list log-file {
key "name";
description
"This list describes a collection of local
logging files.";
leaf name {
type inet:uri {
pattern
'file:.*';
}
description
"This leaf specifies the name of the log
file which MUST use the uri scheme
file:.";
reference
"RFC 8089: The file URI Scheme";
}
uses selector;
uses structured-data;
container file-rotation {
description
"This container describes the configuration
parameters for log file rotation.";
leaf number-of-files {
if-feature "file-limit-size";
type uint32;
default "1";
description
"This leaf specifies the maximum number
of log files retained. Specify 1 for
implementations that only support one
log file.";
}
leaf max-file-size {
if-feature "file-limit-size";
type uint32;
units "megabytes";
description
"This leaf specifies the maximum log
file size.";
}
leaf rollover {
if-feature "file-limit-duration";
type uint32;
units "minutes";
description
"This leaf specifies the length of time
that log events should be written to a
specific log file. Log events that
arrive after the rollover period cause
the current log file to be closed and
a new log file to be opened.";
}
leaf retention {
if-feature "file-limit-duration";
type uint32;
units "minutes";
description
"This leaf specifies the length of time
that completed/closed log event files
should be stored in the file system
before they are removed.";
}
}
}
}
container remote {
if-feature "remote-action";
description
"This container describes the configuration
parameters for forwarding syslog messages
to remote relays or collectors.";
list destination {
key "name";
description
"This list describes a collection of remote logging
destinations.";
leaf name {
type string;
description
"An arbitrary name for the endpoint to connect to.";
}
choice transport {
mandatory true;
description
"This choice describes the transport option.";
case udp {
container udp {
description
"This container describes the UDP transport
options.";
reference
"RFC 5426: Transmission of Syslog Messages over
UDP";
list udp {
key "address";
description
"List of all UDP sessions.";
leaf address {
type inet:host;
description
"The leaf uniquely specifies the address of the
remote host. One of the following must be
specified:
- an ipv4 address,
- an ipv6 address, or a
- host name.";
}
leaf port {
type inet:port-number;
default "514";
description
"This leaf specifies the port number used to
deliver messages to the remote server.";
}
}
}
}
case tls {
container tls {
description
"This container describes the TLS transport
options.";
reference
"RFC 5425: Transport Layer Security (TLS) Transport
Mapping for Syslog ";
list tls {
key "address";
description
"List of all TLS based sessions.";
leaf address {
type inet:host;
description
"The leaf uniquely specifies the address of the
remote host. One of the following must be
specified: an ipv4 address, an ipv6 address, or
a host name.";
}
leaf port {
type inet:port-number;
default "6514";
description
"TCP port 6514 has been allocated as the
default port for syslog over TLS.";
}
uses tlsc:tls-client-grouping;
}
}
}
}
uses selector;
uses structured-data;
leaf facility-override {
type identityref {
base syslog-facility;
}
description
"If specified, this leaf specifies the facility used
to override the facility in messages delivered to the
remote server.";
}
leaf source-interface {
if-feature "remote-source-interface";
type if:interface-ref;
description
"This leaf sets the source interface to be used to
send messages to the remote syslog server. If not set,
messages can be sent on any interface.";
}
container signing {
if-feature "signed-messages";
presence
"If present, syslog-signing options is activated.";
description
"This container describes the configuration
parameters for signed syslog messages.";
reference
"RFC 5848: Signed Syslog Messages";
container cert-signers {
description
"This container describes the signing certificate
configuration for Signature Group 0 which covers the
case for administrators who want all Signature
Blocks to be sent to a single destination.";
list cert-signer {
key "name";
description
"This list describes a collection of syslog message
signers.";
leaf name {
type string;
description
"This leaf specifies the name of the syslog
message signer.";
}
container cert {
uses ct:asymmetric-key-pair-with-cert-grouping;
description
"This is the certificate that is periodically
sent to the remote receiver. The certificate is
inherently associated with its private
and public keys.";
}
leaf hash-algorithm {
type enumeration {
enum SHA1 {
value 1;
description
"This enum describes the SHA1 algorithm.";
}
enum SHA256 {
value 2;
description
"This enum describes the SHA256 algorithm.";
}
}
description
"This leaf describes the syslog signer hash
algorithm used.";
}
}
leaf cert-initial-repeat {
type uint32;
default "3";
description
"This leaf specifies the number of times each
Certificate Block should be sent before the first
message is sent.";
}
leaf cert-resend-delay {
type uint32;
units "seconds";
default "3600";
description
"This leaf specifies the maximum time delay in
seconds until resending the Certificate Block.";
}
leaf cert-resend-count {
type uint32;
default "0";
description
"This leaf specifies the maximum number of other
syslog messages to send until resending the
Certificate Block.";
}
leaf sig-max-delay {
type uint32;
units "seconds";
default "60";
description
"This leaf specifies when to generate a new
Signature Block. If this many seconds have elapsed
since the message with the first message number
of the Signature Block was sent, a new Signature
Block should be generated.";
}
leaf sig-number-resends {
type uint32;
default "0";
description
"This leaf specifies the number of times a
Signature Block is resent. (It is recommended to
select a value of greater than 0 in particular
when the UDP transport RFC 5426 is used.).";
}
leaf sig-resend-delay {
type uint32;
units "seconds";
default "5";
description
"This leaf specifies when to send the next
Signature Block transmission based on time. If
this many seconds have elapsed since the previous
sending of this Signature Block, resend it.";
}
leaf sig-resend-count {
type uint32;
default "0";
description
"This leaf specifies when to send the next
Signature Block transmission based on a count. If
this many other syslog messages have been sent
since the previous sending of this Signature
Block, resend it. A value of 0 means that you
don't resend based on the number of messages.";
}
}
}
}
}
}
}
}
<CODE ENDS>
[note: '\' line wrapping for formatting only]
<!--
Enable console logging of syslogs of severity critical
-->
<?xml version="1.0" encoding="UTF-8"?>
<syslog xmlns="urn:ietf:params:xml:ns:yang:ietf-syslog">
<actions>
<console>
<filter>
<facility-list>
<facility>all</facility>
<severity>critical</severity>
</facility-list>
</filter>
</console>
</actions>
</syslog>
[note: '\' line wrapping for formatting only]
<!--
Enable remote logging of syslogs to udp destination
foo.example.com for facility auth, severity error
-->
<?xml version="1.0" encoding="UTF-8"?>
<syslog xmlns="urn:ietf:params:xml:ns:yang:ietf-syslog">
<actions>
<remote>
<destination>
<name>remote1</name>
<udp>
<udp>
<address>foo.example.com</address>
</udp>
</udp>
<filter>
<facility-list>
<facility>auth</facility>
<severity>error</severity>
</facility-list>
</filter>
</destination>
</remote>
</actions>
</syslog>
The authors wish to thank the following who commented on this proposal:¶
Andy Bierman, Martin Bjorklund, Alex Campbell, Alex Clemm, Francis Dupont, Jim Gibson, Jeffrey Haas, Bob Harold, John Heasley, Giles Heron, Lisa Huang, Mahesh Jethanandani, Warren Kumari, Jeffrey K Lange, Jan Lindblad, Chris Lonvick, Alexey Melnikov, Kathleen Moriarty, Tom Petch, Adam Roach, Juergen Schoenwaelder, Phil Shafer, Yaron Sheffer, Jason Sterne, Peter Van Horne, Kent Watsen, Bert Wijnen, Dale R Worley, and Aleksandr Zhdankin.¶
This document registers one URI in the IETF XML registry [RFC3688] . Following the format in [RFC3688] , the following registration is requested:¶
URI: urn:ietf:params:xml:ns:yang:ietf-syslog Registrant Contact: The IESG. XML: N/A, the requested URI is an XML namespace.¶
This document registers one YANG module in the YANG Module Names registry [RFC8525] . Following the format in [RFC7950] , the following registration is requested:¶
name: ietf-syslog namespace: urn:ietf:params:xml:ns:yang:ietf-syslog prefix: syslog reference: RFC zzzz¶
This section is modeled after the template defined in Section 3.7.1 of [RFC8407].¶
The "ietf-syslog" YANG module specified in this document defines a data model that is designed to be accessed via YANG-based management protocols such as NETCONF [RFC6241] and RESTCONF [RFC8040]. These protocols have mandatory-to-implement secure transport layers (e.g., Secure Shell (SSH) [RFC4252], TLS [RFC8446], and QUIC [RFC9000]) and mandatory-to-implement mutual authentication.¶
The NETCONF access control model [RFC8341] provides the means to restrict access for particular NETCONF or RESTCONF users to a preconfigured subset of all available NETCONF or RESTCONF protocol operations and content.¶
This module imports groupings from ietf-crypto-types YANG module defined in YANG Groupings for Crypto Types [I-D.ietf-netconf-crypto-types]. Security considerations described in that document apply to this module also.¶
There are a number of data nodes defined in this YANG module that are writable/creatable/deletable (i.e., config true, which is the default). These data nodes should be considered sensitive or vulnerable in all network environments. Logging in particular is used to assess the state of systems and can be used to indicate a network compromise. If logging were to be disabled through malicious means, attacks may not be readily detectable. Therefore write operations (e.g., edit-config) to these data nodes without proper protection can have a negative effect on network operations and on network security.¶
In addition there are data nodes that require careful analysis and review. These are the subtrees and data nodes and their sensitivity/vulnerability:¶
Some of the readable data nodes in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get-config, or notification) to these data nodes. These are the subtrees and data nodes and their sensitivity/vulnerability:¶
There are no RPC operations defined in this YANG module.¶
[note: '\' line wrapping for formatting only]
module: ietf-syslog
+--rw syslog!
+--rw actions
+--rw console! {console-action}?
| +--rw filter
| | +--rw facility-list* [facility severity]
| | +--rw facility union
| | +--rw severity union
| | +--rw advanced-compare {select-adv-compare}?
| | +--rw compare? enumeration
| | +--rw action? identityref
| +--rw pattern-match? string {select-match}?
+--rw file {file-action}?
| +--rw log-file* [name]
| +--rw name inet:uri
| +--rw filter
| | +--rw facility-list* [facility severity]
| | +--rw facility union
| | +--rw severity union
| | +--rw advanced-compare {select-adv-compare}?
| | +--rw compare? enumeration
| | +--rw action? identityref
| +--rw pattern-match? string {select-match}?
| +--rw structured-data? boolean {structured-data}?
| +--rw file-rotation
| +--rw number-of-files? uint32 {file-limit-size}?
| +--rw max-file-size? uint32 {file-limit-size}?
| +--rw rollover? uint32
| | {file-limit-duration}?
| +--rw retention? uint32
| {file-limit-duration}?
+--rw remote {remote-action}?
+--rw destination* [name]
+--rw name string
+--rw (transport)
| +--:(udp)
| | +--rw udp
| | +--rw udp* [address]
| | +--rw address inet:host
| | +--rw port? inet:port-number
| +--:(tls)
| +--rw tls
| +--rw tls* [address]
| +--rw address inet:host
| +--rw port?
| | inet:port-number
| +--rw client-identity!
| | +--rw (auth-type)
| | +--:(certificate)
| | | {client-ident-x509-cert}?
| | | +--rw certificate
| | | +--rw (inline-or-keystore)
| | | +--:(inline)
| | | | {inline-definition\
s-s
upported}?
| | | | +--rw inline-definition
| | | | +--rw public-key-form\
at?
| | | | | identityref
| | | | +--rw public-key?
| | | | | binary
| | | | +--rw private-key-for\
mat
?
| | | | | identityref
| | | | +--rw (private-key-ty\
pe)
| | | | | +--:(cleartext-pri\
vat
e-key)
| | | | | | {cleartex\
t-p
rivate-keys}?
| | | | | | +--rw cleartext\
-pr
ivate-key?
| | | | | | binary
| | | | | +--:(hidden-privat\
e-k
ey)
| | | | | | {hidden-p\
riv
ate-keys}?
| | | | | | +--rw hidden-pr\
iva
te-key?
| | | | | | empty
| | | | | +--:(encrypted-pri\
vat
e-key)
| | | | | {encrypte\
d-p
rivate-keys}?
| | | | | +--rw encrypted\
-pr
ivate-key
| | | | | +--rw encryp\
ted
-by
| | | | | +--rw encryp\
ted
-value-format
| | | | | | iden\
tit
yref
| | | | | +--rw encryp\
ted
-value
| | | | | bina\
ry
| | | | +--rw cert-data?
| | | | | end-entity-ce\
rt-
cms
| | | | +---n certificate-exp\
ira
tion
| | | | | {certificate-\
exp
iration-notification}?
| | | | | +-- expiration-dat\
e
| | | | | yang:date-\
and
-time
| | | | +---x generate-csr
| | | | {csr-generati\
on}
?
| | | | +---w input
| | | | | +---w csr-forma\
t
| | | | | | identit\
yre
f
| | | | | +---w csr-info
| | | | | csr-inf\
o
| | | | +--ro output
| | | | +--ro (csr-type\
)
| | | | +--:(p10-csr\
)
| | | | +--ro p10\
-cs
r?
| | | | p\
10-
csr
| | | +--:(central-keystore)
| | | {central-keystore-\
sup
ported,asymmetric-keys}?
| | | +--rw central-keystore-r\
efe
rence
| | | +--rw asymmetric-key?\
| | | | ks:central-as\
ymm
etric-key-ref
| | | | {central-keys\
tor
e-supported,asymmetric-keys}?
| | | +--rw certificate?
| | | leafref
| | +--:(raw-public-key)
| | | {client-ident-raw-public-ke\
y}?
| | | +--rw raw-private-key
| | | +--rw (inline-or-keystore)
| | | +--:(inline)
| | | | {inline-definition\
s-s
upported}?
| | | | +--rw inline-definition
| | | | +--rw public-key-form\
at?
| | | | | identityref
| | | | +--rw public-key?
| | | | | binary
| | | | +--rw private-key-for\
mat
?
| | | | | identityref
| | | | +--rw (private-key-ty\
pe)
| | | | +--:(cleartext-pri\
vat
e-key)
| | | | | {cleartex\
t-p
rivate-keys}?
| | | | | +--rw cleartext\
-pr
ivate-key?
| | | | | binary
| | | | +--:(hidden-privat\
e-k
ey)
| | | | | {hidden-p\
riv
ate-keys}?
| | | | | +--rw hidden-pr\
iva
te-key?
| | | | | empty
| | | | +--:(encrypted-pri\
vat
e-key)
| | | | {encrypte\
d-p
rivate-keys}?
| | | | +--rw encrypted\
-pr
ivate-key
| | | | +--rw encryp\
ted
-by
| | | | +--rw encryp\
ted
-value-format
| | | | | iden\
tit
yref
| | | | +--rw encryp\
ted
-value
| | | | bina\
ry
| | | +--:(central-keystore)
| | | {central-keystore-\
sup
ported,asymmetric-keys}?
| | | +--rw central-keystore-r\
efe
rence?
| | | ks:central-asymm\
etr
ic-key-ref
| | +--:(tls12-psk)
| | | {client-ident-tls12-psk}?
| | | +--rw tls12-psk
| | | +--rw (inline-or-keystore)
| | | | +--:(inline)
| | | | | {inline-definition\
s-s
upported}?
| | | | | +--rw inline-definition
| | | | | +--rw key-format?
| | | | | | identityref
| | | | | +--rw (key-type)
| | | | | +--:(cleartext-sym\
met
ric-key)
| | | | | | +--rw cleartext\
-sy
mmetric-key?
| | | | | | binary
| | | | | | {cleart\
ext
-symmetric-keys}?
| | | | | +--:(hidden-symmet\
ric
-key)
| | | | | | {hidden-s\
ymm
etric-keys}?
| | | | | | +--rw hidden-sy\
mme
tric-key?
| | | | | | empty
| | | | | +--:(encrypted-sym\
met
ric-key)
| | | | | {encrypte\
d-s
ymmetric-keys}?
| | | | | +--rw encrypted\
-sy
mmetric-key
| | | | | +--rw encryp\
ted
-by
| | | | | +--rw encryp\
ted
-value-format
| | | | | | iden\
tit
yref
| | | | | +--rw encryp\
ted
-value
| | | | | bina\
ry
| | | | +--:(central-keystore)
| | | | {central-keystore-\
sup
ported,symmetric-keys}?
| | | | +--rw central-keystore-r\
efe
rence?
| | | | ks:central-symme\
tri
c-key-ref
| | | +--rw id?
| | | string
| | +--:(tls13-epsk)
| | {client-ident-tls13-epsk}?
| | +--rw tls13-epsk
| | +--rw (inline-or-keystore)
| | | +--:(inline)
| | | | {inline-definition\
s-s
upported}?
| | | | +--rw inline-definition
| | | | +--rw key-format?
| | | | | identityref
| | | | +--rw (key-type)
| | | | +--:(cleartext-sym\
met
ric-key)
| | | | | +--rw cleartext\
-sy
mmetric-key?
| | | | | binary
| | | | | {cleart\
ext
-symmetric-keys}?
| | | | +--:(hidden-symmet\
ric
-key)
| | | | | {hidden-s\
ymm
etric-keys}?
| | | | | +--rw hidden-sy\
mme
tric-key?
| | | | | empty
| | | | +--:(encrypted-sym\
met
ric-key)
| | | | {encrypte\
d-s
ymmetric-keys}?
| | | | +--rw encrypted\
-sy
mmetric-key
| | | | +--rw encryp\
ted
-by
| | | | +--rw encryp\
ted
-value-format
| | | | | iden\
tit
yref
| | | | +--rw encryp\
ted
-value
| | | | bina\
ry
| | | +--:(central-keystore)
| | | {central-keystore-\
sup
ported,symmetric-keys}?
| | | +--rw central-keystore-r\
efe
rence?
| | | ks:central-symme\
tri
c-key-ref
| | +--rw external-identity
| | | string
| | +--rw hash?
| | | tlscmn:epsk-supported-\
has
h
| | +--rw context?
| | | string
| | +--rw target-protocol?
| | | uint16
| | +--rw target-kdf?
| | uint16
| +--rw server-authentication
| | +--rw ca-certs! {server-auth-x509-cert}\
?
| | | +--rw (inline-or-truststore)
| | | +--:(inline)
| | | | {inline-definitions-supp\
ort
ed}?
| | | | +--rw inline-definition
| | | | +--rw certificate* [name]
| | | | +--rw name
| | | | | string
| | | | +--rw cert-data
| | | | | trust-anchor-cer\
t-c
ms
| | | | +---n certificate-expira\
tio
n
| | | | {certificate-exp\
ira
tion-notification}?
| | | | +-- expiration-date
| | | | yang:date-and\
-ti
me
| | | +--:(central-truststore)
| | | {central-truststore-supp\
ort
ed,certificates}?
| | | +--rw central-truststore-refer\
enc
e?
| | | ts:central-certificate\
-ba
g-ref
| | +--rw ee-certs! {server-auth-x509-cert}\
?
| | | +--rw (inline-or-truststore)
| | | +--:(inline)
| | | | {inline-definitions-supp\
ort
ed}?
| | | | +--rw inline-definition
| | | | +--rw certificate* [name]
| | | | +--rw name
| | | | | string
| | | | +--rw cert-data
| | | | | trust-anchor-cer\
t-c
ms
| | | | +---n certificate-expira\
tio
n
| | | | {certificate-exp\
ira
tion-notification}?
| | | | +-- expiration-date
| | | | yang:date-and\
-ti
me
| | | +--:(central-truststore)
| | | {central-truststore-supp\
ort
ed,certificates}?
| | | +--rw central-truststore-refer\
enc
e?
| | | ts:central-certificate\
-ba
g-ref
| | +--rw raw-public-keys!
| | | {server-auth-raw-public-key}?
| | | +--rw (inline-or-truststore)
| | | +--:(inline)
| | | | {inline-definitions-supp\
ort
ed}?
| | | | +--rw inline-definition
| | | | +--rw public-key* [name]
| | | | +--rw name
| | | | | string
| | | | +--rw public-key-format
| | | | | identityref
| | | | +--rw public-key
| | | | binary
| | | +--:(central-truststore)
| | | {central-truststore-supp\
ort
ed,public-keys}?
| | | +--rw central-truststore-refer\
enc
e?
| | | ts:central-public-key-\
bag
-ref
| | +--rw tls12-psks? empty
| | | {server-auth-tls12-psk}?
| | +--rw tls13-epsks? empty
| | {server-auth-tls13-epsk}?
| +--rw hello-params {tlscmn:hello-params}?
| | +--rw tls-versions
| | | +--rw min? identityref
| | | +--rw max? identityref
| | +--rw cipher-suites
| | +--rw cipher-suite*
| | tlscsa:tls-cipher-suite-algo\
rit
hm
| +--rw keepalives {tls-client-keepalives}?
| +--rw peer-allowed-to-send? empty
| +--rw test-peer-aliveness!
| +--rw max-wait? uint16
| +--rw max-attempts? uint8
+--rw filter
| +--rw facility-list* [facility severity]
| +--rw facility union
| +--rw severity union
| +--rw advanced-compare {select-adv-compare}?
| +--rw compare? enumeration
| +--rw action? identityref
+--rw pattern-match? string {select-match}?
+--rw structured-data? boolean {structured-data}?
+--rw facility-override? identityref
+--rw source-interface? if:interface-ref
| {remote-source-interface}?
+--rw signing! {signed-messages}?
+--rw cert-signers
+--rw cert-signer* [name]
| +--rw name string
| +--rw cert
| | +--rw public-key-format?
| | | identityref
| | +--rw public-key? binar\
y
| | +--rw private-key-format?
| | | identityref
| | +--rw (private-key-type)
| | | +--:(cleartext-private-key)
| | | | {cleartext-private-keys}?
| | | | +--rw cleartext-private-key? binar\
y
| | | +--:(hidden-private-key)
| | | | {hidden-private-keys}?
| | | | +--rw hidden-private-key? empty\
| | | +--:(encrypted-private-key)
| | | {encrypted-private-keys}?
| | | +--rw encrypted-private-key
| | | +--rw encrypted-by
| | | +--rw encrypted-value-format
| | | | identityref
| | | +--rw encrypted-value
| | | binary
| | +--rw cert-data?
| | | end-entity-cert-cms
| | +---n certificate-expiration
| | | {certificate-expiration-notificati\
on}
?
| | | +-- expiration-date
| | | yang:date-and-time
| | +---x generate-csr {csr-generation}?
| | +---w input
| | | +---w csr-format identityref
| | | +---w csr-info csr-info
| | +--ro output
| | +--ro (csr-type)
| | +--:(p10-csr)
| | +--ro p10-csr? p10-csr
| +--rw hash-algorithm? enumeration
+--rw cert-initial-repeat? uint32
+--rw cert-resend-delay? uint32
+--rw cert-resend-count? uint32
+--rw sig-max-delay? uint32
+--rw sig-number-resends? uint32
+--rw sig-resend-delay? uint32
+--rw sig-resend-count? uint32
¶
Many vendors extend the list of facilities available for logging in their implementation. Additional facilities may not work with the syslog protocol as defined in [RFC5424] and hence such facilities apply for local syslog-like logging functionality.¶
The following is an example that shows how additional facilities could be added to the list of available facilities (in this example two facilities are added):¶
[note: '\' line wrapping for formatting only]
module example-vendor-syslog-types {
namespace "http://example.com/ns/vendor-syslog-types";
prefix vendor-syslogtypes;
import ietf-syslog {
prefix syslog;
}
organization
"Example, Inc.";
contact
"Example, Inc.
Customer Service
E-mail: syslog-yang@example.com";
description
"This module contains a collection of vendor-specific YANG type
definitions for SYSLOG.";
revision 2024-03-19 {
description
"Version 1.0";
reference
"Vendor SYSLOG Types: SYSLOG YANG Model";
}
identity vendor_specific_type_1 {
base syslog:syslog-facility;
description
"Adding vendor specific type 1 to syslog-facility";
}
identity vendor_specific_type_2 {
base syslog:syslog-facility;
description
"Adding vendor specific type 2 to syslog-facility";
}
}
¶
Terminal output with requirements more complex than the console subtree currently provides, are expected to be supported via vendor extensions rather than handled via the file subtree.¶
The syslog/file/log-file/file-rotation container contains configuration parameters for syslog file rotation. This section describes how these fields might be used by an implementer to name syslog files in a rotation process. This information is offered as an informative guide only.¶
When an active syslog file with a name specified by log-file/name, reaches log-file/max-file-size and/or syslog events arrive after the period specified by log-file/rollover, the logging system can close the file, can compress it, and can name the archive file <log-file/ name>.0.gz. The logging system can then open a new active syslog file <log-file/name>.¶
When the new syslog file reaches either of the size limits referenced above, <log-file/name>.0.gz can be renamed <log-file/name>.1.gz and the new syslog file can be closed, compressed and renamed <log-file/ name>.0.gz. Each time that a new syslog file is closed, each of the prior syslog archive files named <log-file/name>.<n>.gz can be renamed to <log-file/name>.<n + 1>.gz.¶
Removal of archive log files could occur when either or both:¶
- log-file/number-of-files specified - the logging system can create up to log-file/number-of-files syslog archive files after which, the contents of the oldest archived file could be overwritten.¶
- log-file/retention specified - the logging system can remove those syslog archive files whose file expiration time (file creation time plus the specified log-file/retention time) is prior to the current time.¶